Hydraulic

H-0250-VR

OMS Vertical Retracting Rotating Thruster Hydraulic

Our vertical 360° rotating thrusters benefit from the same in-hub technology as the fixed tunnel thruster, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This type of thruster has a very small footprint so is ideally suited to installation in aft or fore lockers where space is at a premium. The vertical rotating thruster is also very useful where vessels have a deep V profile so the thruster is fitted higher providing a longer deployment stroke to clear the hull. They can also be fitted further forward or aft than a conventional tunnel thruster increasing the turning moment of the hull and therefore requiring less power input. This type of thruster uses a vertical lead screw and guide rods to raise and lower the unit via a motor. As with the swing thruster, all motors, cables and cooling hoses are concealed within the vessel so are not in direct contact with sea water. OMS has worked with a number of boat builders to optimise the range offered. The rotate mechanism allows you to position the pod and provide 360 degrees of thrust. The OMS rotating thruster has also been installed and used as emergency propulsion.

SPECIFICATIONS
Max Power	25 kW (33 Hp)
Thrust	300 Kgf (661 Lbf)
Prop Diameter	255 mm (10 in)

H-0300-VR

OMS Vertical Retracting Rotating Thruster Hydraulic

Our vertical 360° rotating thrusters benefit from the same in-hub technology as the fixed tunnel thruster, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This type of thruster has a very small footprint so is ideally suited to installation in aft or fore lockers where space is at a premium. The vertical rotating thruster is also very useful where vessels have a deep V profile so the thruster is fitted higher providing a longer deployment stroke to clear the hull. They can also be fitted further forward or aft than a conventional tunnel thruster increasing the turning moment of the hull and therefore requiring less power input. This type of thruster uses a vertical lead screw and guide rods to raise and lower the unit via a motor. As with the swing thruster, all motors, cables and cooling hoses are concealed within the vessel so are not in direct contact with sea water. OMS has worked with a number of boat builders to optimise the range offered. The rotate mechanism allows you to position the pod and provide 360 degrees of thrust. The OMS rotating thruster has also been installed and used as emergency propulsion.

SPECIFICATIONS
Max Power	36 kW (48 Hp)
Thrust	432 Kgf (952 Lbf)
Prop Diameter	305 mm (12 in)

H-0400-VR

OMS Vertical Retracting Rotating Thruster Hydraulic

Our vertical 360° rotating thrusters benefit from the same in-hub technology as the fixed tunnel thruster, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This type of thruster has a very small footprint so is ideally suited to installation in aft or fore lockers where space is at a premium. The vertical rotating thruster is also very useful where vessels have a deep V profile so the thruster is fitted higher providing a longer deployment stroke to clear the hull. They can also be fitted further forward or aft than a conventional tunnel thruster increasing the turning moment of the hull and therefore requiring less power input. This type of thruster uses a vertical lead screw and guide rods to raise and lower the unit via a motor. As with the swing thruster, all motors, cables and cooling hoses are concealed within the vessel so are not in direct contact with sea water. OMS has worked with a number of boat builders to optimise the range offered. The rotate mechanism allows you to position the pod and provide 360 degrees of thrust. The OMS rotating thruster has also been installed and used as emergency propulsion.

SPECIFICATIONS
Max Power	63 kW (85 Hp)
Thrust	756 Kgf (1667 Lbf)
Prop Diameter	406 mm (16 in)

H-0500-VR

OMS Vertical Retracting Rotating Thruster Hydraulic

Our vertical 360° rotating thrusters benefit from the same in-hub technology as the fixed tunnel thruster, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This type of thruster has a very small footprint so is ideally suited to installation in aft or fore lockers where space is at a premium. The vertical rotating thruster is also very useful where vessels have a deep V profile so the thruster is fitted higher providing a longer deployment stroke to clear the hull. They can also be fitted further forward or aft than a conventional tunnel thruster increasing the turning moment of the hull and therefore requiring less power input. This type of thruster uses a vertical lead screw and guide rods to raise and lower the unit via a motor. As with the swing thruster, all motors, cables and cooling hoses are concealed within the vessel so are not in direct contact with sea water. OMS has worked with a number of boat builders to optimise the range offered. The rotate mechanism allows you to position the pod and provide 360 degrees of thrust. The OMS rotating thruster has also been installed and used as emergency propulsion.

SPECIFICATIONS
Max Power	99 kW (133 Hp)
Thrust	1188 Kgf (2619 Lbf)
Prop Diameter	508 mm (20 in)

H-0600-VR

OMS Vertical Retracting Rotating Thruster Hydraulic

Our vertical 360° rotating thrusters benefit from the same in-hub technology as the fixed tunnel thruster, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This type of thruster has a very small footprint so is ideally suited to installation in aft or fore lockers where space is at a premium. The vertical rotating thruster is also very useful where vessels have a deep V profile so the thruster is fitted higher providing a longer deployment stroke to clear the hull. They can also be fitted further forward or aft than a conventional tunnel thruster increasing the turning moment of the hull and therefore requiring less power input. This type of thruster uses a vertical lead screw and guide rods to raise and lower the unit via a motor. As with the swing thruster, all motors, cables and cooling hoses are concealed within the vessel so are not in direct contact with sea water. OMS has worked with a number of boat builders to optimise the range offered. The rotate mechanism allows you to position the pod and provide 360 degrees of thrust. The OMS rotating thruster has also been installed and used as emergency propulsion.

SPECIFICATIONS
Max Power	142 kW (191 Hp)
Thrust	1704 Kgf (3757 Lbf)
Prop Diameter	610 mm (24 in)

H-0700-VR

OMS Vertical Retracting Rotating Thruster Hydraulic

Our vertical 360° rotating thrusters benefit from the same in-hub technology as the fixed tunnel thruster, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This type of thruster has a very small footprint so is ideally suited to installation in aft or fore lockers where space is at a premium. The vertical rotating thruster is also very useful where vessels have a deep V profile so the thruster is fitted higher providing a longer deployment stroke to clear the hull. They can also be fitted further forward or aft than a conventional tunnel thruster increasing the turning moment of the hull and therefore requiring less power input. This type of thruster uses a vertical lead screw and guide rods to raise and lower the unit via a motor. As with the swing thruster, all motors, cables and cooling hoses are concealed within the vessel so are not in direct contact with sea water. OMS has worked with a number of boat builders to optimise the range offered. The rotate mechanism allows you to position the pod and provide 360 degrees of thrust. The OMS rotating thruster has also been installed and used as emergency propulsion.

SPECIFICATIONS
Max Power	194 kW (260 Hp)
Thrust	2328 Kgf (5132 Lbf)
Prop Diameter	711 mm (28 in)

H-0800-VR

OMS Vertical Retracting Rotating Thruster Hydraulic

Our vertical 360° rotating thrusters benefit from the same in-hub technology as the fixed tunnel thruster, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This type of thruster has a very small footprint so is ideally suited to installation in aft or fore lockers where space is at a premium. The vertical rotating thruster is also very useful where vessels have a deep V profile so the thruster is fitted higher providing a longer deployment stroke to clear the hull. They can also be fitted further forward or aft than a conventional tunnel thruster increasing the turning moment of the hull and therefore requiring less power input. This type of thruster uses a vertical lead screw and guide rods to raise and lower the unit via a motor. As with the swing thruster, all motors, cables and cooling hoses are concealed within the vessel so are not in direct contact with sea water. OMS has worked with a number of boat builders to optimise the range offered. The rotate mechanism allows you to position the pod and provide 360 degrees of thrust. The OMS rotating thruster has also been installed and used as emergency propulsion.

SPECIFICATIONS
Max Power	252 kW (338 Hp)
Thrust	2772 Kgf (6111 Lbf)
Prop Diameter	813 mm (32 in)

H-1000-VR

OMS Vertical Retracting Rotating Thruster Hydraulic

Our vertical 360° rotating thrusters benefit from the same in-hub technology as the fixed tunnel thruster, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This type of thruster has a very small footprint so is ideally suited to installation in aft or fore lockers where space is at a premium. The vertical rotating thruster is also very useful where vessels have a deep V profile so the thruster is fitted higher providing a longer deployment stroke to clear the hull. They can also be fitted further forward or aft than a conventional tunnel thruster increasing the turning moment of the hull and therefore requiring less power input. This type of thruster uses a vertical lead screw and guide rods to raise and lower the unit via a motor. As with the swing thruster, all motors, cables and cooling hoses are concealed within the vessel so are not in direct contact with sea water. OMS has worked with a number of boat builders to optimise the range offered. The rotate mechanism allows you to position the pod and provide 360 degrees of thrust. The OMS rotating thruster has also been installed and used as emergency propulsion.

SPECIFICATIONS
Max Power	393 kW (527 Hp)
Thrust	4323 Kgf (9506 Lbf)
Prop Diameter	1016 mm (40 in)

H-1200-VR

OMS Vertical Retracting Rotating Thruster Hydraulic

Our vertical 360° rotating thrusters benefit from the same in-hub technology as the fixed tunnel thruster, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This type of thruster has a very small footprint so is ideally suited to installation in aft or fore lockers where space is at a premium. The vertical rotating thruster is also very useful where vessels have a deep V profile so the thruster is fitted higher providing a longer deployment stroke to clear the hull. They can also be fitted further forward or aft than a conventional tunnel thruster increasing the turning moment of the hull and therefore requiring less power input. This type of thruster uses a vertical lead screw and guide rods to raise and lower the unit via a motor. As with the swing thruster, all motors, cables and cooling hoses are concealed within the vessel so are not in direct contact with sea water. OMS has worked with a number of boat builders to optimise the range offered. The rotate mechanism allows you to position the pod and provide 360 degrees of thrust. The OMS rotating thruster has also been installed and used as emergency propulsion.

SPECIFICATIONS
Max Power	565 kW (758 Hp)
Thrust	6215 Kgf (13702 Lbf)
Prop Diameter	1219 mm (48 in)

H-1400-VR

OMS Vertical Retracting Rotating Thruster Hydraulic

Our vertical 360° rotating thrusters benefit from the same in-hub technology as the fixed tunnel thruster, whilst allowing the thruster to fully retract leaving a fair hull with minimal drag. This type of thruster has a very small footprint so is ideally suited to installation in aft or fore lockers where space is at a premium. The vertical rotating thruster is also very useful where vessels have a deep V profile so the thruster is fitted higher providing a longer deployment stroke to clear the hull. They can also be fitted further forward or aft than a conventional tunnel thruster increasing the turning moment of the hull and therefore requiring less power input. This type of thruster uses a vertical lead screw and guide rods to raise and lower the unit via a motor. As with the swing thruster, all motors, cables and cooling hoses are concealed within the vessel so are not in direct contact with sea water. OMS has worked with a number of boat builders to optimise the range offered. The rotate mechanism allows you to position the pod and provide 360 degrees of thrust. The OMS rotating thruster has also been installed and used as emergency propulsion.

SPECIFICATIONS
Max Power	768 kW (1030 Hp)
Thrust	8448 Kgf (18624 Lbf)
Prop Diameter	1422 mm (56 in)